RF camera production at Telford International Centre

Power Up Case Study with Utility Warehouse

Encore appointed us. So gassProductions delivered the camera department for Utility Warehouse‘s Power Up event at the Telford International Centre in April 2026.

The brief asked for RF camera production an arena audience could trust. One wireless camera had to move freely through the room, without a single torn frame on the big screens.

Behind it sat a 4 × camera 2ME system and a dedicated RF engineer. Then came a mirrored failover portable production unit (PPU). A three-day show cannot stop to fix a fault.

RF camera production at Telford International Centre, a licensed wireless transmitter feeding the Utility Warehouse show


🎬 Services Provided

🎥 4 × camera live production for IMAG and record (2 × operated box lens, fixed wide, RF)

📡 Licensed RF camera system with a dedicated RF engineer (frequency coordination and live monitoring)

🛰️ Public-band RF backup rigged and ready on standby for immediate deployment

🎛️ 2ME vision mixing with a clean IMAG feed and a dirty programme mix (PIP and lower thirds ready)

🎛️ Mirrored failover PPU with a duplicated camera signal path (no single point of failure)

💾 ISO recording of every camera, the content feed and the programme mix (symmetrical H.264 systems)

📐 1920 × 1080 50p Rec.709 acquisition with on-site file handover to a client drive

📅 Pre-production signal flow design and venue RF coordination


Production Overview, RF camera production

Encore needed a camera package for a full-arena partner event. Two operated box lens cameras worked from a rear platform. A fixed wide held the safety shot. Meanwhile an RF camera roamed the arena floor. That fourth camera is the one the audience actually notices, because it puts them on the screens.

The RF camera ran on a licensed wireless system with its own dedicated engineer. That engineer handled frequency coordination, deployment and live fault management throughout the show. Also, a second public-band RF system sat rigged and on standby. It could take over immediately if the licensed link ever failed. In practice it never carried the show. That said, it was never more than a patch away.

We mixed vision as a 2ME production. ME1 cut cameras only, feeding the in-room LED screens with a clean IMAG mix. Meanwhile ME2 carried the full programme with slides, picture-in-picture and lower thirds. That mix went to record, and out beyond the main room. We ISO recorded every camera, the content feed and the programme mix. Those ran on symmetrical H.264 systems at 1920 × 1080 50p. Then the full set went to the client’s drive before the crew left site.

Underneath all of it ran a complete second PPU. It mirrored the primary, with a duplicated camera signal path. We designed and agreed the failover architecture before the show. So no single point of failure existed in the camera or vision chain. The audience saw none of this, which is exactly the point.

Vision mixer operator running the 2ME programme mix for Utility Warehouse at Telford


Why RF camera production matters

Licensed spectrum holds the shot

Licence-exempt wireless shares open public bands. Radio mics, in-ear monitors, wifi and every phone in the audience all sit in there. However, a licensed RF assignment gives the camera protected, coordinated spectrum. So a vision mixer can trust the roaming shot. Without it, the shot tears the moment the room fills up.

The RF engineer is the system

We coordinated frequencies with the venue and the wider production. Then we tested them on the walk. Finally we monitored them live for all three show days. Wireless links fail quietly, and at the worst possible moment. So RF health has to be somebody’s whole job. It is not a task shared out across the camera crew.

Failover you hope nobody notices

A mirrored PPU carries a duplicated signal path. So the production can lose a core system mid-show and carry on. When an event cannot stop, redundancy is not an upgrade. It is the design brief. Therefore we build it in before anyone arrives on site.

Engineer monitoring camera ISOs and tally states on the multiview at the Utility Warehouse event


Final Outcome

  • A 4 × camera 2ME production delivering a clean IMAG mix and a full programme record across three show days
  • A licensed RF camera roaming the arena with protected spectrum and a dedicated engineer watching it live
  • A public-band RF backup and a mirrored failover PPU rigged, tested and held on standby throughout
  • ISO recordings of every camera, the content feed and the programme mix handed over on site on the client’s drive

Judge RF camera production on the frame it never drops. Licensed spectrum, a dedicated engineer and a mirrored signal path build that reliability.

Backstage production control with sound and vision desks at Telford International Centre


Why choose gassProductions for RF camera production

gassProductions builds and owns its own PPUs. We also design failover into the signal path from day one. For twenty years the same two founders have delivered event video production and creative video production. Recent work includes multi-camera IMAG production for Microsoft and live streaming for Bridgepoint. So does your event need a wireless camera the audience can rely on? We would be glad to talk it through.

👉 Get in touch